|Factory Address:No.72 Qianjin Street,Huangpi District,Wuhan,Chinafirstname.lastname@example.org|
|Place of Origin:||China|
|Minimum Order Quantity:||1 unit|
|Packaging Details:||exporting wooden cases|
|Delivery Time:||25 working days after receipt 50% deposit|
|Supply Ability:||15 units per month|
|Model No.:||WL-FA5200ES-7||Heating Method:||Electric Heating|
|Cooling Method:||Water Cooling||Suitable For:||PVC, PC, PET, PETG, Etc. All Kinds Of Plastic Materials|
|Power Supply:||380V, 50/60Hz, 26KW||Dimension:||2300(L)X830(W)X1800(H)mm|
|Gross Weight:||2500 KGS|
Energy Saving Card Fusing Laminator , 8000 cards per hour, 400*500mm, 7 daylights
WL-FA5200ES-7 is is designed for laminating various RFID cards and electronic labels as well as Inlays. It features hydraulic pressing, electric heating, water cooling and PLC controlled. The dual-tower structure is well compact and rigid. The pressure releasing spring is applied between the top template and upper beam to realize slight contact. The temperature for heating and the pressures for cool and heat lamination are controlled through the fully-closed loop. The temperature is evenly distributed and the control of pressure is accurate. The control precision of temperature is as ±1ºC and the control precision of pressures are as ±0.1MPa.In order to meet the special lamination demands of high-end cards, the process of hot template rising can be set into 1 to 7 sections as per specific technological requirements and the time for staying at each section can be flexibly set.
♦ Laminating Method:using Single Cylinder Jacks Up To Maintain Balance Automatically, Controlled With Double Pumps Cooperating With Import Pressure Module By Frequency Conversion, Multilevel Pressure,With Equality And Invariableness Pressure And High Precision
♦ Heating Method:use Heater To Heat Up And The Temperature Can Be Controlled In Many Sections,The Parameter Of Every Section Can Be Set.
♦ Temperature Control Method: The PLC Work With The Temperature Control Module To Realize The Invariableness Control For The Temperature Basis The Parameter Set In Every Section.
♦ Cooling Method:cooled By Frost Water Cycle Disposed By Chiller(The Frequency Of The Stream Amount Can Be Controlled),Saving Energy And With Good Effect.
♦ Hot-Pressed Vacuum System Can Be Added As The Clients Need To Ensure The Good Laminating Effect
♦ A Attached Material Feeding Machine Can Be Added As The Clients Need To Ensure The High Material Feeding Efficiency
♦ Use Imported Aluminium Laminating Board, Alloy, The Transfer Of Heat Is More Balanced
♦ Designed with seven daylights, increasing 20% card productivity more than laminator with daylights & achieving faster heating speed and better quality.
|Model||WENLIN-FA5200ES-7 Energy Saving Laminator|
|Electrical Configuration||Imported (Schneider & Omron Brand)|
|Energy Saving Device||Energy saving automatic door for hot tower|
Water cycling cooling ；
Seven pipes for water inlet and seven pipes for water outlet
|Heating Method||Electric heating|
|Pressure||Heating 12 stages / cooling 5 stages|
|Laminating Plate Smoothness||
|Heating Plate||Imported aluminum alloy|
|Laminating Plate Thickness||45mm|
|Hydraulic Cylinder for Each Tower||Four|
|Laminating Plate Size||420mm×520mm|
|Voltage||380V 60HZ/ 26KW|
|Productivity||about 8,000 cards/hour|
|Suitable for||RFID cards,IC/ID Contact cards, Contactless cards, Bank dual interface cards, Gold & Silver Commemorative Cards,etc.|